The tenon shoulders hold the cabinet body interior horizontal opening to net size.Cabinet body mortise and tenon joints are machined In-the-Nest with Specialized Tooling, which eliminates double handling and the need for secondary operations and machinery.TenonCam router bits automatically handle material thickness variations, eliminating the need to continually measure and reenter these variations into the software program.Engineered for both Frameless and Face Frame cabinet construction methods.TenonCam is a Turn-Key system for CNC Nested Based cabinet manufacturing.Please refer to the drawings at the bottom of this page for further clarification. This ensures that the mortise and tenon joints will be flush, and allows additional machining to be done without having to remove parts from the nest. All other cabinet parts are orientated exterior face down to the spoil board. The TenonCam router bits are available for: 1 inch, 3/4 inch, 5/8 inch and 1/2 inch thick material.Ĭabinet backs and drawer bottoms are machined interior face down to the spoil board, so they can be sized for thickness.
The software allows tenons to be cut anywhere In-the-Nest. The picture above is of a TenonCam router bit, shown cutting a tenon on a cabinet bottom. No double handling or secondary machining. The concept is to put a 4 x 8 sheet of material on the Router, process it, and then take completely milled, cut to size, parts off the Router. This process is used to produce completely milled cabinet, drawer and toe board parts, without secondary operations or supporting machinery. TenonCam is a manufacturing system, consisting of patent pending router bits and software, used to form mortise and tenon joints, In-the-Nest, on a flat table CNC Router.
0 kommentar(er)
